EN 10219-1, EN 10219-2, SHS, RHS, CHS, Square Hollow Section, Rectangular Hollow Section, Circular Hollow Section, Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions Part 2: Tolerances, dimensions and sectional properties, S235JRH(1.0039) S275J0H(1.0149) S275J2H(1.0138) S355J0H(1.0547) S355J2H(1.0576) S355K2H(1.0512) S275NH(1.0493) S275NLH(1.0497) S355NH(1.0539) S355NLH(1.0549) S460NH(1.8953) S460NLH(1.8956) S275MH(1.8843) S275MLH(1.8844) S355MH(1.8845) S355MLH(1.8846) S420MH(1.8847) S420MLH(1.8848) S460MH(1.8849) S460MLH(1.8850)

EN 10219 Cold formed welded structural hollow sections of non-alloy and fine grain steels Part 1: Technical delivery conditions Part 2: Tolerances, dimensions and sectional properties

Standard: EN 10219-1, EN 10219-2

Material: S420MLH, 1.8848

Dimensions & Tolerance

Characteristics	Tolerance
Outside Diameter of Size (H:Longest Side; B:Shortest Side)	H＜100mm, B＜100mm	max ±1% with a min of ±0.5mm
	100mm≤H≤200mm, 100mm≤B≤200mm	±0.8%
	H>200mm, B>200mm	±0.6%
Wall Thickness	WT≤5mm	±10%
Wall Thickness	WT>5mm	±0.5mm
Concavity/Convexity	max ±0.8% with a min of ±0.5mm
Squareness of Sides	90°±1°
External Corner Radius	WT≤6mm	1.6WT≤R≤2.4WT
	6mm＜WT≤10mm	2.0WT≤R≤3.0WT
	WT>10mm	2.4WT≤R≤3.6WT
Twist	2mm + 0.5mm/m in length
Straightness	1.5mm/1000mm in total length
Mass	±6% in individual lengths
Length	L＜6000mm	+5mm/-0mm
	6000mm≤L≤10000mm	+15mm/-0mm
	L>10000mm	+5mm/-0mm plus 1mm/m

EN 10219-1 and EN 10219-2 specify the technical delivery conditions, tolerances, dimensions and sectional properties for cold formed welded structural hollow sections of circular, square or rectangular forms and applies to structural hollow sections formed cold without subsequent heat treatment.

Manufacture: hollow sections to EN 10219-1 and EN 10219-2 shall be manufactured by electric welding (ERW) or submerged arc welding (SAW).
Delivery Condition: the hollow sections shall be delivered cold formed without subsequent heat treatment except that the weld seam may be in the as welded or heat treated condition.
Inspection & Test: chemistry composition analysis, tensile test, impact test for qualities J2 and K2, welded pipes NDT of the weld, surface inspection and dimension check.

Keyword: EN 10219-1, EN 10219-2, SHS, RHS, CHS, Square Hollow Section, Rectangular Hollow Section, Circular Hollow Section

Home | About Us | Product | Know How | Contact Us