EN 10216-2, DIN 17175, High Pressure Steel Pipe, Boiler Steel Pipe, Seamless steel tubes for pressure purposes Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties, Carbon Steel Pipes, Alloy Steel Pipes, EN 10216-2 P195GH 1.0348 Q195 1010 360 10, EN 10216-2 P235GH 1.0345 St37, EN 10216-2 P265GH 1.0425 St44 St45.8 1020 410, EN 10216-2 16Mo3 1.5415 15Mo3, EN 10216-2 10CrMo9-10 1.7380 10CrMo910 T22 P22 K21590, EN 10216-2 11CrMo9-10 1.7383, EN 10216-2 13CrMo4-5 1.7335 T12 K11562 13CrMo44 P12, EN 10216-2 X10CrMoVNb9-1 1.4903 T91 K90901 P91 K91560, DIN 17175, BS 3059, ASTM A213, ASME SA213, ASTM A335

EN 10216-2 Seamless steel tubes for pressure purposes Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties

Standard: EN 10216-2
Equivalent Standards: DIN 17175, BS 3059, ASTM A213, ASME SA213, ASTM A335

Material: P235GH, 1.0345
Equivalent Materials: St37, 1010, 360, 10

Chemistry Composition

C, %	Si, %	Mn, %	P, %	S, %	Cr, %	Ni, %	Cu, %	Mo, %	Nb, %	Ti, %	V, %
0.16 max	0.35 max	1.20 max	0.025 max	0.020 max	0.30 max	0.30 max	0.30 max	0.08 max	0.01 max	0.04 max	0.02 max

Mechanical Properties

Tensile Strength , MPa	Yield Strength, MPa	Elongation, %
360-500	235 min	25 min

Outside Diameter & Tolerance

Hot rolled	Outside Diameter, mm	Tolerance
	OD≤219.1	±1% or ±0.5mm
	OD>219.1	±1% or ±0.5mm
Cold Drawn	Outside Diameter, mm	Tolerance
Cold Drawn	OD≤114	±0.5% or ±0.3mm

Wall thickness & Tolerance

Hot rolled	Outside Diameter, mm	WT/OD	Tolerance
	OD≤219.1	WT/OD≤2.5%	±12.5% or ±0.4mm
		2.5%＜WT/OD≤5%
		5%＜WT/OD≤10%
		WT/OD>10%
	OD>219.1	WT/OD≤2.5%	±20%
		2.5%＜WT/OD≤5%	±15%
		5%＜WT/OD≤10%	±12.5%
		WT/OD>10%	±10%
Cold Drawn	Outside Diameter, mm	-	Tolerance
Cold Drawn	OD≤114	-	±10% or ±0.2mm

EN 10216-2 specifies the technical delivery conditions in two test categories for seamless tubes of circular cross section, with specified elevated temperature properties, made of non-alloy and alloy steel.

Manufacture: tubes to EN 10216-2 shall be manufactured by hot formed or cold finished.
Heat Treatment: the tubes shall be supplied in normalized delivery condition.
Inspection & Test: chemistry composition test, tensile test, flattening test, flaring test, NDT, surface inspection and dimension check.

Length: 5800mm; 6000mm; 10000mm; 11500mm; 11800mm; and so on.
Max length: 18000mm, also U bending can be offered.

Keyword: EN 10216-2, DIN 17175, High Pressure Steel Pipe, Boiler Steel Pipe

Home | About Us | Product | Know How | Contact Us