ASTM A106 Grade B, Seamless Steel Pipe, High Temperature Service, Carbon Steel Pipe, Fire Tubes, ASTM A106 Grade A, ASTM A106 Grade B, ASTM A106 Grade C, ASTM A106 Gr.B, ASTM A106 / A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service, Air Shaft Pipe, Auger Boring Pipe, Barge Spuds, Culverts, Drainage Pipe, Dredge Pipe, Jacking Pipe Micro Tunneling Pipe, Open Cut Casing Penstock, Ramming Pipe, Road Bore Casing Sewer Pipe, Slip Lining Pipe, Smoke Stacks Split Casing, Trenchless Construction Tunneling Pipe, Underground Contractors, Water Well Casing, Coatings, Coal tar Epoxy Coating Black Bituminous Coating Primer, Full Penetration Weld Procedures Liquid Dye Penetrant Material Test Report

ASTM A106 Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

Standard: ASTM A106
Equivalent Standard: EN 10216-2, BS 3602 Part I, DIN 17175, NF A 49-215, NBR 6321

Material: SA106 Grade B
Equivalent Materials: St45.8, 1020, 410, 1.0405, HFS 430, TU 42-c

Chemistry Composition

C, %	Mn, %	P, %	S, %	Si, %	Cr, %	Cu, %	Mo, %	Ni, %	V, %
0.30 max	0.29-1.06	0.035 max	0.035 max	0.10 min	0.40 max	0.40 max	0.15 max	0.40 max	0.08 max

Mechanical Properties

Tensile Strength , MPa	Yield Strength, MPa	Elongation, %
415 min	240 min	22 min

Outside Diameter & Tolerance

Outside Diameter , inch	Tolerance, mm
1/8≤OD≤1-1/2	±0.40
1-1/2＜OD≤4	±0.79
4＜OD≤8	+1.59/-0.79
8＜OD≤18	+2.38/-0.79
18＜OD≤26	+3.18/-0.79
26＜OD≤34	+3.96/-0.79
OD>34	+4.75/-0.79

Wall thickness & Tolerance

The min wall thickness should not exceed 12.5% of norminal wall thickness.

ASTM A106/A106M covers seamless carbon steel pipe for high-temperature service in NPS 1⁄8 to NPS 48 [DN 6 to DN 1200]. It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of ASTM A106/A106M. Pipe ordered under ASTM A106/A106M shall be suitable for bending, flanging, and similar forming operations, and for welding. When the steel is to be welded, it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.

Manufacture: pipes shall be made by seamless process, cold drawn or hot rolled.
Inspection & Test: chemistry composition analysis, tensile test, bend test, flattening test, NDT, surface inspection and dimension check.

Dimension: Download
Length: 5800mm; 6000mm; 11800mm; 12000mm; and so on.

Keyword: ASTM A106, Seamless Steel Pipe, High Temperature Service, Carbon Steel Pipe

Home | About Us | Product | Know How | Contact Us