ГОСТ 9567-75 15ChM, 15CrMo, Трубы стальные прецизионные ,Precision Steel Tube, Power Steering, HPL Tube, Carbon Steel Pipes, Alloy Steel Pipes, Precision Steel Tubes, GOST 9567-75 10 1010 St35 St37 St37.4 E235, GOST 9567-75 10G2 10Mn2, GOST 9567-75 20 1020 St44 St45, GOST 9567-75 35 1035, GOST 9567-75 45 1045, GOST 9567-75 15ChM 15CrMo, GOST 9567-75 20Ch 20Cr, Steel tubes for precision applications, Seamless cold drawn tubes, cold drawn seamless steel tubing, DIN-2391 sheet 2 steel grade st37 cond. nbk, AMG-69107, IU 920004, steel tube for safety system, steel tube for shock absorber, steel tube for steering system, precision steel tubes for automotive, mounting ring, container cylinder, inner cylinder, hollow piston rod, steering cylinder, inflator tube, camshafts, end forming set frames, IP beams, Engine Cradles, Anti-roll bars, seat back frames, Rear arms, Torsion beams, Stabiliser bars, Door beams, A-Pillars

GOST 9567-75 Precision steel pipes

GOST 9567-75 applies to cold-formed and hot-rolled steel pipes of high manufacturing precision.

Standard: GOST 9567-75
Equivalent Standards: DIN 2391, EN 10305-1, EN 10305-4, ASTM A519, NF 699, NBR 8476, BS 6323 Part 4, NF A 49-330-85, BS 6323-4, NF A 49-310, UNI 6403

Material: 15ChM
Equivalent Materials: 15CrMo

Chemistry Composition

C, %	Si, %	Mn, %	P, %	S, %	Cr, %	Ni, %	Cu, %	Mo, %
0.11-0.18	0.17-0.37	0.40-0.70	0.025 max	0.025 max	0.80-1.10	0.30 max	0.30 max	0.40-0.55

Mechanical Properties

Hot rolled	Tensile Strength , MPa	Yield Strength, MPa	Elongation, %
Hot rolled	431 min	225 min	21 min
Cold Drawn	Tensile Strength , MPa	Yield Strength, MPa	Elongation, %
Cold Drawn	431 min	226 min	21 min

Outside Diameter & Tolerance

Hot rolled	Outside Diameter, mm	Tolerance, mm
	OD≤50	±0.35
	50＜OD≤219	±0.8%
	OD>219	±1.0%
	68≤OD≤194, OD/WT: 4-10	±0.5%
Cold Drawn	Outside Diameter, mm	Tolerance, mm
	OD≤30	±0.10
	32≤OD≤40	±0.15
	42≤OD≤50	±0.20
	51≤OD≤60	±0.25
	63≤OD≤70	±0.30
	73≤OD≤80	±0.35
	83≤OD≤90	±0.40
	95≤OD≤108	±0.45
	110≤OD≤120	±0.50
	OD>130	±0.8%

Wall thickness & Tolerance

Hot rolled	Wall Thickness , mm	Tolerance, %
	WT≤15	±10
	1＜WT≤5	±8
	7≤WT≤45, OD/WT: 4-10	±6
Cold Drawn	Wall Thickness , mm	Tolerance, %
	0.2≤WT≤0.8, 5≤OD≤108	±0.05mm
	0.8＜WT≤5, 5≤OD≤108	±7.5
	WT>5, 5≤OD≤108	±6
	WT≤2.5, 110 ≤OD≤250	±10
	2.5＜WT≤5, 110 ≤OD≤250	+10/-7.5
	WT>5, 110≤OD≤250	±7.5

Length: 4000mm; 8030mm; 8050mm; 12010mm; 12030mm; 12050mm; and so on.
Further process: cutting, deformation.

Keyword: precision steel pipe, precision steel tube, GOST 9567-75, DIN 2391, EN 10305-1, EN 10305-4, ГОСТ 9567-75

Home | About Us | Product | Know How | Contact Us