GB/T 24592 35CrNi3MoV High Pressure Alloy Steel Tubes for Polyethylene Service, 35CrNi3MoV

Alloy Steel Pipes

GB/T 24592 35CrNi3MoV

Product

Home | About Us | Product | Know How | Contact Us

GB/T 24592 High Pressure Alloy Steel Tubes for Polyethylene Service

Standard: GB/T 24592

Material: 35CrNi3MoV

Chemistry Composition

C, %	Si, %	Mn, %	Cr, %	Ni, %	Mo, %	S, %	P, %	Cu, %
0.26-0.33	0.17-0.37	0.40-0.70	0.80-1.10	0.30 max	0.15-0.25	0.025 max	0.025 max	0.30 max

Mechanical Properties

Tensile Strength, MPa	Yield Strength, MPa	Elongation, %
588 min	392 min	13 min

Outside Diameter & Tolerance

Outside Diameter, mm	Tolerance
32≤OD≤50	±0.5mm
51≤OD≤219	±1%

Wall thickness & Tolerance

Wall Thickness, mm	Tolerance, %
3≤OD≤15	+12.5/-15
16≤OD≤30	±12.5
32≤OD≤45	+10/-12.5

GB/T 24592 specifies the size, shape, weight, technical requirements, test methods, inspection rules, packaging, marking and quality certificate of high-pressure alloy steel pipes for polyethylene. GB/T 24592 is applicable to high-pressure alloy steel pipes for polyethylene with working pressure not greater than 260MPa and working temperature not higher than 350℃.
GB/T 24592规定了聚乙烯用高压合金钢管的尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。GB/T 24592适用于工作压力不大于260MPa、工作温度不高于350℃的聚乙烯用高压合金钢管。

Manufacture: the tubes shall be manufactured by cold drawn and hot rolled.
Delivery Condition: heat treated.
Inspection & Test: chemical composition analysis, elongation test, hardness test, flattening test, bending test, flaring test, NDT, surface inspection and dimension check.

Length: 4000mm; 6000mm; 6500mm; 10000mm; 12010mm; and so on.
Max developed length: 30 meters, also U bending, finning, studded process can be provided.
Option: shot blasting on the outside surface to remove mill scale, make the surface matte colour; surface polishing as preparation work done for further processing, for instance finning.

Keyword: GOST 8732-78, Steel Pipe, Hot worked Steel Pipe, Seamless Steel Pipe

Home | About Us | Product | Know How | Contact Us