|
|
| Home | About Us | Product | Know How | Contact Us | |
 |
|
| ASTM A204 / A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum | |
This specification covers molybdenum alloy steel plates, intended particularly for welded boilers and other pressure vessels. Plates under this specification are available in three grades having different strength levels: Grade A; Grade B; and Grade C. The steel shall be killed. The steel shall conform to the chemical requirements specified. Tension tests on plates shall conform to the requirements specified. |
|
| 1. Scope | |
1.1 This specification covers molybdenum-alloy steel plates, intended particularly for welded boilers and other pressure vessels. 1.2 Plates under this specification are available in three grades having different strength levels as follows. 1.3 The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. 1.4 The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with this specification. |
|
| 2. Referenced Documents | |
ASTM Standards A20/A20M Specification for General Requirements for Steel Plates for Pressure Vessels |
|
For more details, please contact us |
|
 |
|
| Home | About Us | Product | Know How | Contact Us | |